Author Topic: Help SMD identification for newbie  (Read 644 times)

0 Members and 1 Guest are viewing this topic.

Offline rednex

  • Newbie
  • Posts: 3
  • Country: at
Help SMD identification for newbie
« on: March 28, 2018, 09:18:46 am »
Hi all, Im a newbie, maybe someone can help to identify that SMD
Unfortunatelly that smd has burnt,  the picture was made from another SMD
so I can not measure




« Last Edit: March 28, 2018, 09:22:04 am by rednex »
 

Offline KhronX

  • Frequent Contributor
  • **
  • Posts: 335
  • Country: fi
    • Khron's Cave - Electronics Blog
Re: Help SMD identification for newbie
« Reply #1 on: March 28, 2018, 12:59:04 pm »
The "U" prefix for component designators usually means it's some sort of integrated circuit (as opposed to a single or dual diode / transistor).

I don't suppose you have any idea what the role of this is/was, in the circuit it's in?
Khron's Cave - Electronics - Audio - Teardowns - Mods - Repairs - Projects - Music - Rants - Shenanigans
 
The following users thanked this post: rednex

Offline rednex

  • Newbie
  • Posts: 3
  • Country: at
Re: Help SMD identification for newbie
« Reply #2 on: March 28, 2018, 01:40:12 pm »
Thanks!
the 6 pin smd is placed after 12V input connector and goes to AZ1117C  low dropout three-terminal regulator
 

Offline gamalot

  • Frequent Contributor
  • **
  • Posts: 515
  • Country: au
  • Correct my English
Re: Help SMD identification for newbie
« Reply #3 on: March 28, 2018, 01:51:24 pm »
 
The following users thanked this post: rednex

Offline rednex

  • Newbie
  • Posts: 3
  • Country: at
Re: Help SMD identification for newbie
« Reply #4 on: March 28, 2018, 02:17:47 pm »
OMG! THANKS!  :popcorn:
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf