Electronics > Repair
Help with bricked APC UPS SMT1500
(1/11) > >>
PeeJay:
Hi, somehow I've managed to brick my UPS.  |O Not the NMC but the actual ups. I've tried the serial cable firmware update tool but to no avail.
I took the controller board out and discovered it's an STM32F103RC and they have very helpfully populated a SWD interface, so I dumped the ROM but the provided firmware file is not in a format I can figure out. (Both attached).

Any ideas what to do next?
DavidAlfa:
No idea if this is ok for that model:

https://www.eevblog.com/forum/repair/repair-help-for-apc-ups-br1500g-f06-error/msg5074456/#msg5074456
darkspr1te:
i dont see anything attached




darkspr1te

DavidAlfa:
Yes, almost at the end there's an hex file!
PeeJay:
Sorry, the attachment didn't attach! It's on the first post now.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod