EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: error21 on July 28, 2019, 04:36:01 pm
-
Hi
Could somebody please help me with the following IC? They are from 2 different products and I THINK they are used to measure the input current.
I did look on google but could not find anything
What I did measure is that PIN2 is GND and PIN5 is +5V and between 3 and 4 there is a 100K resistor
Thanks
-
Looks like this: http://pdf1.alldatasheet.com/datasheet-pdf/view/658183/SGMICRO/SGM8271.html (http://pdf1.alldatasheet.com/datasheet-pdf/view/658183/SGMICRO/SGM8271.html)
-
http://www.smdmark.com/en-US/search/code?id=sg5 (http://www.smdmark.com/en-US/search/code?id=sg5)
https://www.bing.com/search?q=sgm8271+filetype:pdf (https://www.bing.com/search?q=sgm8271+filetype:pdf)