EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: jmcdonald on November 23, 2016, 06:51:37 am
-
:palm: :palm: :palm: :bullshit:
500v was put into the meter in the continuity mode.
Would like to get service manual and or schematics?
Q14 a 6 pin Sot363 with K1 on it went pop, IC2 is to hot to touch 5 pin sot23 and the unit will not power on :'(
have removed q14 and still no good IC2 could be a voltage reg :-// it have the marking of B481