Electronics > Repair
HP 4263B lcr help to repair
(1/1)
Zolonon:
Please help
I want to find the connection point between the mainboard  and the dc-dc red wire in 4 pin connector. Which device on the mainboard (in the red circle in the first picture) does it connect to and what is the voltage? 

 Where does it connect to? I can't see the circuit in the middle layer. (Left side in last picture ) where connect to  component

Thank you for help
TERRA Operative:
Here's the pinout from my 4263B:

Left to right (viewed from front of instrument) - Red, Black, Yellow, Black.

Voltages:
Red - 2.68V (DC Bias supply?)
Black - GND
Yellow - 16.0VDC
Black - GND

(GND pins are connected together)



Also, check out my unlock program if you want to activate options 001 and 002 if not already activated on your instrument. :)
https://github.com/JaredCabot/HP-Agilent-4263B-Option-Unlocker
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod