Electronics > Repair
HP 6632B Needs Repair [UK] - SOLVED
dans34:
i have this HP 6632B psu that when its turned on (after the self test) it shows 0.0007v 0.0004a on the display ,
When you set a volatage and connect the load its fine for around 20~30s but then it switches to CC and the voltage drops
I lack the electronical knowlage to diagnose the issue , does anyone know of a repair place in the UK (preferably in the North Yorkshire Area) that could take alook at my unit ?
gerrysweeney:
Are you sure thats the right model number, I tried googling it but could not find it.
Gerry
KJDS:
That's not an a HP part number.
dans34:
sorry its 6632b
KJDS:
The service manual is available here.
http://cp.literature.agilent.com/litweb/pdf/5962-8119.pdf
Navigation
[0] Message Index
[#] Next page
Go to full version