0 Members and 1 Guest are viewing this topic.
Got my 3458A today and error annunciation which was shown on the picture revealed only one error: unit requires calibration.
Quote from: Samogon on March 08, 2018, 02:09:32 amGot my 3458A today and error annunciation which was shown on the picture revealed only one error: unit requires calibration. Sooo... a 9V battery and a 10K/10% carbon comp resistor and you're good to go.
Got my 3458A today and error annunciation which was shown on the picture revealed only one error: unit requires calibration. So let me join 3458A club Also got mains inlet/filter from digikey it is 10EEJ1 from TEcorcom. This is first step i will do before any further attempts to switch unit on. Dont want spoil good deal i got.
I had a conversation with Keysight and the current filter they use on new 3458a is Part Number 9135-5773. If you pull that up and magnify the picture, you will see that it is:Schaffner FN9222-3-06