| Electronics > Repair |
| HP54600B with spike problem with and without signal |
| << < (9/9) |
| sacha:
Hi everyone, I solved it by replacing U33 and with a small capacitor on pin 20. |
| fmashockie:
Glad you fixed it! Might be helpful to change the subject of your first post to include 'fixed' or 'solved' in the title to help others with a similar issue. |
| sacha:
Hi fmashockie, thanks for your clarification, in reality it is not fully functional yet because I also have channel 1 which is not precise on the reading on the ranges from 1 volt /division upwards. As soon as possible I will add the other components that I find faulty. |
| Navigation |
| Message Index |
| Previous page |