Electronics > Repair

HP54600B with spike problem with and without signal

<< < (9/9)

Hi everyone, I solved it by replacing U33 and with a small capacitor on pin 20.

Glad you fixed it! Might be helpful to change the subject of your first post to include 'fixed' or 'solved' in the title to help others with a similar issue.

Hi fmashockie, thanks for your clarification, in reality it is not fully functional yet because I also have channel 1 which is not precise on the reading on the ranges from 1 volt /division upwards. As soon as possible I will add the other components that I find faulty.


[0] Message Index

[*] Previous page

There was an error while thanking
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod