EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: PiotrMisiuna on August 06, 2023, 02:25:05 pm

Title: identification needed. Blown IC onboard miele washing machine ELP 160
Post by: PiotrMisiuna on August 06, 2023, 02:25:05 pm

really nicely blown IC. Probably smps driver or power factor correction. I made a photo through an ocular of my microscope, silicone is cooked by phillips. any ideas?
Partial symbols visible are

Title: Re: identification needed. Blown IC onboard miele washing machine ELP 160
Post by: DavidAlfa on August 06, 2023, 02:57:00 pm

TEA1522T

https://www.elektroda.pl/rtvforum/topic3310220.html (https://www.elektroda.pl/rtvforum/topic3310220.html)

Title: Re: identification needed. Blown IC onboard miele washing machine ELP 160
Post by: PiotrMisiuna on September 07, 2023, 07:13:40 pm

Thanx one more time, washing machine started. No other issues.