Author Topic: If only all faults were this easy to diagnose  (Read 1502 times)

0 Members and 1 Guest are viewing this topic.

Offline KJDS

  • Super Contributor
  • ***
  • Posts: 2442
  • Country: gb
    • my website holding page
If only all faults were this easy to diagnose
« on: June 27, 2015, 07:49:12 pm »
All I need now is to work out what I'll replace the blown resistors with.


Offline Deathwish

  • Supporter
  • ****
  • Posts: 1426
  • Country: wales
Electrons are typically male, always looking for any hole to get into.
trying to strangle someone who talks out of their rectal cavity will fail, they can still breath.
God hates North Wales, he has put my home address on the blacklist of all couriers with instructions to divert all parcels.
 

Offline SeanB

  • Super Contributor
  • ***
  • Posts: 15429
  • Country: za
Re: If only all faults were this easy to diagnose
« Reply #2 on: June 27, 2015, 08:16:58 pm »
At least you can still read the exact value, though that 100R resistor on the left has definitely escaped the visual QC check with that coating defect.

Looks like they were input terminating resistors, and very precise at that.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf