Hi folks.
Just got a fresh battery for my oldish Lenovo X230. The battery is less then a week old and gone through 3-5 discharge cycles.
Today I noticed that it already lost 5% of it's original capacity:
# acpitool -B
Remaining capacity : 53550 mWh, 98.49%
Design capacity : 57720 mWh
Last full capacity : 54370 mWh, 94.20% of design capacity
Capacity loss : 5.804%
Present rate : 0 mW
Charging state : Unknown
Battery type : Li-ion
Model number : 45N1025
Serial number : 19141
I checked the battery yesterday and it showed 0.1% capacity loss. Besides, today the laptop failed to go to the sleep mode (this happen time to time to my X230) and the machine was hanging ON with fan running in my backpack unattended for about 40 minutes. But it was idling and when I found this, the case was just warm, maybe 40-45 C - this should not be a problem for LiIon that is 85% charged AFAIK.
Could this be related?
Can I do something about this?
How this numbers acre actually calculated without going through full cycle?