EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: 2X on July 09, 2023, 03:36:40 pm

Title: iPhone 11 battery connector pinout
Post by: 2X on July 09, 2023, 03:36:40 pm

Hello,
I measure the battery of an iphone 11 and I measure in all pins 0V. Does anyone knows what voltage I have to measure in every pin (attached photo)? On android batteries where have 4pin one is Positive, one GND, one Battery Status and one Battery Temperature. On this battery there are 6pin.

Title: Re: iPhone 11 battery connector pinout
Post by: Jane on July 12, 2023, 07:38:10 pm

You'd better ask in a forum about cell phones e.g.
https://forum.gsmhosting.com/vbb/f1086/

Title: Re: iPhone 11 battery connector pinout
Post by: Alfi1966 on July 14, 2023, 07:22:40 am

You will not measure a voltage when unconnected. If the data lines are not talking to the charge controller the FET's in the battery pcb will not open.

Found some info here. Hope it helps: https://logi.wiki/index.php/File:iPhone_11_Connector_1.jpg

Title: Re: iPhone 11 battery connector pinout
Post by: 2X on September 17, 2023, 08:06:21 pm

 With only connected the connectors 1 & 2 the current that draw the iphone is about 500mA (if I disconnect the connector 1 the current falls to zero). This current is normal with olny these connectors connected? Also, there is a way to fix the Charging Flex (if it is indeed the problem there)?

Title: Re: iPhone 11 battery connector pinout
Post by: 2X on October 11, 2023, 09:02:51 pm

Finally I changed only the LCD screen and worked flawless.