Electronics > Repair
Keithley 2001 Repair (Bad Capacitors)
derZockerMP:
Hope you can repair it with that. :-+
Likely not, but we have one at work.
I would recommend you test the transformer, but do not test it built-in. Disassemble it and test it externally on a Variac or AC source. Increase the voltage slowly and ensure the current is within range. Check the output voltage as well. Before the first smoke test, check the different voltage ranges on the board with ohms mode on a multimeter to ensure there are no shorts. Then you can connect the transformer.
Please continue posting the repair, very interested in the process :popcorn:
Best Regards
Navigation
[0] Message Index
[*] Previous page
Go to full version