Electronics > Repair

KRK rokit 5 speaker Part Identification

(1/2) > >>

Maxwell55:
Hi, I'm hoping someone could help me identify 2 components on a KRK RP5 G3 mainboard. These are labeled ES0 and ES1 and are on the RCA plug circuit.
They blew up when I attached a hot RCA cable.   Thank you

David_AVD:
How have you determined that they have failed?

Maxwell55:
I've shown you a picture of the good speaker,
I've determined they're blown from the following picture of the failed speaker.
Have any idea what they are?

fzabkar:
They appear to be bidirectional ESD protection diodes.

Maxwell55:
Thank you for replying, I thought is was some kind of diode but wasn't sure. I don't have any specs of those 2 parts. I'll try to shine a light sideways to see if it shows anything, otherwise how could I find a replacement?

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod