Author Topic: Lambda EMS 33-33-3 power supply  (Read 220 times)

0 Members and 1 Guest are viewing this topic.

Offline big jooeTopic starter

  • Newbie
  • Posts: 1
  • Country: hr
Lambda EMS 33-33-3 power supply
« on: September 30, 2024, 09:34:33 am »
Hi all,
Have obtained Lambda EMS 33-33-3 power supply but it does not have voltahe setting helipot, only current setting helipot. How to adjust voltage on this supply? ...or someone has a schematic of it?
many thanks
Joe
« Last Edit: September 30, 2024, 10:34:55 am by big jooe »
 

Offline artag

  • Super Contributor
  • ***
  • Posts: 1281
  • Country: gb
Re: Lambda EMS 33-33-3 power supply
« Reply #1 on: September 30, 2024, 11:16:45 am »
It seems to be covered by the manual at https://www.artisantg.com/info/TDK_Lambda_EMS_33_33_3_TP_LB_CE_1568_Manual_201981311314.pdf but presumably in a version that has no or few front panel controls. However section 3.3.2 describes how to program it using the rear panel tag strip which might be appropriate.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf