Author Topic: Lecroy WaveRunner showing signals from nowhere ???????  (Read 705 times)

0 Members and 1 Guest are viewing this topic.

Offline darkstar49

  • Frequent Contributor
  • **
  • Posts: 257
Lecroy WaveRunner showing signals from nowhere ???????
« on: December 23, 2017, 08:53:58 pm »
check the pic... channels 1-3 show signals from the void !!!!!!

I recall having seen similar things in another thread, but can't get to it... if someone has a pointer... I'd be glad !!
 

Offline rx8pilot

  • Super Contributor
  • ***
  • Posts: 3610
  • Country: us
  • If you want more money, be more valuable.
Re: Lecroy WaveRunner showing signals from nowhere ???????
« Reply #1 on: December 23, 2017, 08:55:25 pm »
Memory.
Factory400 - the worlds smallest factory. https://www.youtube.com/c/Factory400
 

Offline darkstar49

  • Frequent Contributor
  • **
  • Posts: 257
Re: Lecroy WaveRunner showing signals from nowhere ???????
« Reply #2 on: December 23, 2017, 08:57:14 pm »
You must be kidding !!

Memory issues leading to a square wave, a ramp and a sine wave ????????? I'm not that sceptical by nature, but no... can't eat that one !!    ;-
 

Offline darkstar49

  • Frequent Contributor
  • **
  • Posts: 257
Re: Lecroy WaveRunner showing signals from nowhere ???????
« Reply #3 on: December 23, 2017, 09:06:46 pm »
finally found it...  doesn't smell too good.... (looks like this simulation mode is entered when the PCI interface card can't talk to or gets unexpected results from the acquisition board...

https://www.eevblog.com/forum/testgear/i-have-a-strange-issue-of-lecroy-sda-6020-could-you-please-help-thanks!/25/

 

Offline darkstar49

  • Frequent Contributor
  • **
  • Posts: 257
Re: Lecroy WaveRunner showing signals from nowhere ???????
« Reply #4 on: December 23, 2017, 09:28:02 pm »

would be highly interested in get some info on how to disable simulation mode in the service menu ??? can't find the check boxes mentioned in the other thread...????
 

Offline rx8pilot

  • Super Contributor
  • ***
  • Posts: 3610
  • Country: us
  • If you want more money, be more valuable.
Re: Lecroy WaveRunner showing signals from nowhere ???????
« Reply #5 on: December 23, 2017, 10:09:17 pm »
I meant to make that more complete, but was distracted.

I wanted to say it is just saved waveforms in memory - not a fault with memory itself.

Short and misplld from my mobile......

Factory400 - the worlds smallest factory. https://www.youtube.com/c/Factory400
 

Offline darkstar49

  • Frequent Contributor
  • **
  • Posts: 257
Re: Lecroy WaveRunner showing signals from nowhere ???????
« Reply #6 on: December 23, 2017, 10:57:56 pm »
As in the other thread... there’s an issue with the acq board...
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf