Electronics > Repair
Lecroy wavesurfer 3024 fail to boot
<< < (3/14) > >>
gkmaia:

--- Quote from: heatsystem on December 02, 2021, 02:28:02 pm ---I've got the same problem with boot with WS 3024, MFG Date Sep-2015.
I tried the recovery disk from kendor but it still doesn't boot to UI.
Can someone help?
Thanks for help
heatsystem

--- End quote ---

The card I used was the original card and it was formatted as a Master Boot Record. I think this will play a role. Try formatting the card as FAT - MBR. My card root directory looked like the image attached.
gkmaia:

--- Quote from: tautech on December 02, 2021, 08:27:36 am ---
By the looks of the MSO socket the probe is most probably all passives and likely you can find one on EvilBay for not too much.


--- End quote ---

Do you know if I require a key to activate the WS3K-MSO function? Or just by sticking probs there it will enable it. I tried pressing the digital button at the front panel and it does not do anything.

WS3K-FG has been included.
tautech:

--- Quote from: gkmaia on December 03, 2021, 01:20:06 am ---
--- Quote from: tautech on December 02, 2021, 08:27:36 am ---
By the looks of the MSO socket the probe is most probably all passives and likely you can find one on EvilBay for not too much.


--- End quote ---

Do you know if I require a key to activate the WS3K-MSO function?

--- End quote ---
Yes, see the description of the option, it includes the SW license.
Hunt out the Options menu and check what is licensed and if any other options have trial use times remaining.
Don't know if LeCroy offer trial uses but Siglent do 30.
heatsystem:

--- Quote from: gkmaia on December 03, 2021, 01:16:47 am ---The card I used was the original card and it was formatted as a Master Boot Record. I think this will play a role. Try formatting the card as FAT - MBR. My card root directory looked like the image attached.

--- End quote ---
Thats it: I formatted with diskpart on command-line (clean disk, create partition primary, active, format fs=fat quick), copied all the files, started the WaveSurfer and after some minutes it started as expected!

Thanks to kendor and gkmaia!  :-+ :-+ :-+

heatsystem
gkmaia:

--- Quote from: tautech on December 03, 2021, 01:49:36 am ---
--- Quote from: gkmaia on December 03, 2021, 01:20:06 am ---
--- Quote from: tautech on December 02, 2021, 08:27:36 am ---
By the looks of the MSO socket the probe is most probably all passives and likely you can find one on EvilBay for not too much.


--- End quote ---

Do you know if I require a key to activate the WS3K-MSO function?

--- End quote ---
Yes, see the description of the option, it includes the SW license.
Hunt out the Options menu and check what is licensed and if any other options have trial use times remaining.
Don't know if LeCroy offer trial uses but Siglent do 30.

--- End quote ---


I checked. Has all the decoding options plus the function generator. But does not have the MSO. Still an amazing score for $800!

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod