Electronics > Repair
light bolt 1 phase connection logical problem
(1/1)
john23:
Hello ,an AC light bolp has needs two wires , while AC power in the wall has three wires.
So how am i supposed to connect the lightbolp in the power in the wall?
Thanks.
CaptDon:
It is so obvious, The lamp gets connected to the brown (hot) and blue (return) and if you have a metal fixture the green (earth ground) goes to the metal frame of the fixture. If this wasn't obvious to you from the start then let someone else do the wiring.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod