Author Topic: light bolt 1 phase connection logical problem  (Read 196 times)

0 Members and 1 Guest are viewing this topic.

Offline john23Topic starter

  • Regular Contributor
  • *
  • Posts: 191
  • Country: aq
light bolt 1 phase connection logical problem
« on: November 05, 2024, 04:24:21 am »
Hello ,an AC light bolp has needs two wires , while AC power in the wall has three wires.
So how am i supposed to connect the lightbolp in the power in the wall?
Thanks.
 

Offline CaptDon

  • Super Contributor
  • ***
  • Posts: 2181
  • Country: is
Re: light bolt 1 phase connection logical problem
« Reply #1 on: November 05, 2024, 01:16:15 pm »
It is so obvious, The lamp gets connected to the brown (hot) and blue (return) and if you have a metal fixture the green (earth ground) goes to the metal frame of the fixture. If this wasn't obvious to you from the start then let someone else do the wiring.
Collector and repairer of vintage and not so vintage electronic gadgets and test equipment. What's the difference between a pizza and a musician? A pizza can feed a family of four!! Classically trained guitarist. Sound engineer.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf