Author Topic: luke 73 III dc voltage range issues.  (Read 914 times)

0 Members and 1 Guest are viewing this topic.

Offline ddwilsonTopic starter

  • Contributor
  • Posts: 13
  • Country: us
luke 73 III dc voltage range issues.
« on: March 03, 2019, 03:00:17 am »
The meter works fine except on DC voltage up to about 3v works fine, above that will not read. Like the auto range does not work. Any suggestions where to start?
 

Offline retiredcaps

  • Super Contributor
  • ***
  • Posts: 3575
  • Country: ca
Re: luke 73 III dc voltage range issues.
« Reply #1 on: March 03, 2019, 04:50:15 am »
Service manual at

http://oldradio.tesla.hu/rajzok/muszerek/fluke77multimeter.pdf

suggests U1 or S1 bad.  I would check the switch for dirt/debris/damage, etc.
 

Offline ddwilsonTopic starter

  • Contributor
  • Posts: 13
  • Country: us
Re: luke 73 III dc voltage range issues.
« Reply #2 on: March 04, 2019, 03:08:50 am »
thanks, will take another look at the switch
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf