EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: 10101 on May 22, 2015, 04:00:56 pm

Title: Lumia 720 screen problem
Post by: 10101 on May 22, 2015, 04:00:56 pm
I've had a Nokia lumia 720 for almost 2 years and 1-2 weeks ago a reeeeealy strange thing started to happen. Usualy this starts after i use it for a while but has happened in other ocasions, the problem is that the screen starts moving around alone like if it was a haunted phone  :wtf: like if someone was touching it like crazy.
Yes i asked google first  :-+ , and what i found was that i had replace the screen, nothing more....
So my questions are, replacing the screen is the only possible way to fix it ? And what's happening with it to make that effect (electronics wise) ?

Pardon if my english is poor, 10101
Title: Re: Lumia 720 screen problem
Post by: DavidDLC on May 22, 2015, 04:20:25 pm
I've had a Nokia lumia 720 for almost 2 years and 1-2 weeks ago a reeeeealy strange thing started to happen. Usualy this starts after i use it for a while but has happened in other ocasions, the problem is that the screen starts moving around alone like if it was a haunted phone  :wtf: like if someone was touching it like crazy.
Yes i asked google first  :-+ , and what i found was that i had replace the screen, nothing more....
So my questions are, replacing the screen is the only possible way to fix it ? And what's happening with it to make that effect (electronics wise) ?

Pardon if my english is poor, 10101

Did you try a factory reset already ?

David.
Title: Re: Lumia 720 screen problem
Post by: 10101 on May 22, 2015, 06:15:28 pm
not yet  :palm:
Title: Re: Lumia 720 screen problem
Post by: MatthewEveritt on May 22, 2015, 07:29:11 pm
I've had odd movements like that before, in my case i just needed to clean the screen. Worth trying if you don't do it regularly anyway.
Title: Re: Lumia 720 screen problem
Post by: wraper on May 22, 2015, 10:26:34 pm
You don't need to replace the screen if you mean actual display by this word. Touchscreen (digitizer) is a separate part in this phone. Except failed touchscreen, it could be that some moisture got in the phone or connector became loose. Anyway, it is easy to disassemble this model, so worth to check, clean and reseat touchscreen connector. If the issue happens when you attach something with USB (especially non original charger), this is not a fault of the phone.
Title: Re: Lumia 720 screen problem
Post by: wraper on May 22, 2015, 10:36:03 pm
BTW, you said almost 2 years. Likely you should still have a warranty. Even if proof of purchase papers are lost, you still can claim the warranty in authorized service center. With a condition that the phone was intended to be sold in the country where you claim the warranty and 25 month warranty time since the date it was sent to distributor have not passed yet.
Title: Re: Lumia 720 screen problem
Post by: 10101 on May 22, 2015, 11:04:38 pm
I've had odd movements like that before, in my case i just needed to clean the screen. Worth trying if you don't do it regularly anyway.

Yeh i clean it quite often  :-+.

You don't need to replace the screen if you mean actual display by this word. Touchscreen (digitizer) is a separate part in this phone. Except failed touchscreen, it could be that some moisture got in the phone or connector became loose. Anyway, it is easy to disassemble this model, so worth to check, clean and reseat touchscreen connector. If the issue happens when you attach something with USB (especially non original charger), this is not a fault of the phone.

Humm, didn't check the conector inside maybe i'll do it. I mean the thingy that "feels" the touch, sorry for the crude language  |O.
Yeh even without a cable atached still does the error
Title: Re: Lumia 720 screen problem
Post by: rob77 on May 24, 2015, 07:48:17 pm
had a similar issue with a tablet - after some minutes it looked like a crazy drunk invisible man is randomly touching the screen really fast :D
in my case it helped to re-solder the touch controller chips (they were soldered to the flat flex of the digitizer).

so i would strongly suggest to clean everything (as other's suggested already) - if that doesn't help then re-flow the part of the board where the connector from digitizer/display ends. if none helps then buy a new part.