Electronics > Repair
Mainboard with No Picture
<< < (8/8)
dzonika9661:
Check these mosfets marked in X symbol on picture

If you have oscilloscope check if crystals are working within rated frequency
2X:

--- Quote from: dzonika9661 on September 07, 2024, 07:47:24 pm ---Check these mosfets marked in X symbol on picture

If you have oscilloscope check if crystals are working within rated frequency

--- End quote ---

Hello,
I measured all the voltages from the working and from the faulty maniboard. Only at the mosfets of the CPU I found some differences.

Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod