Electronics > Repair
Mainboard with No Picture
dzonika9661:
Check these mosfets marked in X symbol on picture
If you have oscilloscope check if crystals are working within rated frequency
2X:
--- Quote from: dzonika9661 on September 07, 2024, 07:47:24 pm ---Check these mosfets marked in X symbol on picture
If you have oscilloscope check if crystals are working within rated frequency
--- End quote ---
Hello,
I measured all the voltages from the working and from the faulty maniboard. Only at the mosfets of the CPU I found some differences.
Navigation
[0] Message Index
[*] Previous page
Go to full version