« previous next »
Pages: [1]   Go Down

Author Topic: MASTECH MS8229 - Blown resistor  (Read 3387 times)

0 Members and 1 Guest are viewing this topic.

Offline vagfouTopic starter

  • Newbie
  • Posts: 8
MASTECH MS8229 - Blown resistor
« on: April 07, 2015, 10:35:31 am »
Hi,

I have a MASTECH MS8229 multimeter and after an unfortunate frequency measurement it seems to have some mulfuctions.
After opening the multimeter I saw a blown resistor. It is the R33 on the main circuit board.

Can anyone (who has the MS8229) open his multimeter and tell me the Ohms of that resistor? (or anyone who has the circuit schematic)

Logged
 

Offline 1xrtt

  • Regular Contributor
  • *
  • Posts: 70
  • Country: br
Re: MASTECH MS8229 - Blown resistor
« Reply #1 on: April 07, 2015, 05:37:18 pm »
It has the inscription 01D (same as R13, close by). I'm not sure what it means, but it measures ~100K in-circuit.
Logged
 

Offline PeterFW

  • Frequent Contributor
  • **
  • Posts: 577
  • Country: de
    • Stuff that goes boom
Re: MASTECH MS8229 - Blown resistor
« Reply #2 on: April 07, 2015, 06:44:11 pm »
Quote from: 1xrtt on April 07, 2015, 05:37:18 pm
It has the inscription 01D (same as R13, close by). I'm not sure what it means, but it measures ~100K in-circuit.

EIA-96 codet 1% resistor, that is 01 (100) multiplied by D (1000) so 100K seems abut right.
Logged
 

Offline vagfouTopic starter

  • Newbie
  • Posts: 8
Re: MASTECH MS8229 - Blown resistor
« Reply #3 on: April 08, 2015, 09:44:55 pm »
Thank you very much guys... you really helped me.
I fixed it!
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee