« previous next »
Pages: [1]   Go Down

Author Topic: Microsoft Surface Table looking for hard drive image  (Read 1268 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnny10Topic starter

  • Frequent Contributor
  • **
  • Posts: 901
  • Country: us
Microsoft Surface Table looking for hard drive image
« on: February 08, 2018, 03:37:07 pm »
I am looking for HD image for 1st Generation Microsoft Surface Table.

Thanks

My unit came without HD
Logged
Tektronix TDS7104, DMM4050, HP 3561A, HP 35665, Tek 2465A, HP8903B, DSA602A, Tek 7854, 7834, HP3457A, Tek 575, 576, 577 Curve Tracers, Datron 4000, Datron 4000A, DOS4EVER uTracer, HP5335A, EIP534B 20GHz Frequency Counter, TrueTime Rubidium, Sencore LC102, Tek TG506, TG501, SG503, HP 8568B
 

Offline ChuckDarwin

  • Regular Contributor
  • *
  • Posts: 57
  • Country: gu
Re: Microsoft Surface Table looking for hard drive image
« Reply #1 on: February 08, 2018, 10:21:17 pm »
Try: https://support.microsoft.com/en-us/surfacerecoveryimage
You will need the device ID/serial number.
(Edited to US URL)
« Last Edit: February 08, 2018, 10:36:29 pm by ChuckDarwin »
Logged
 
The following users thanked this post: Johnny10

Offline Johnny10Topic starter

  • Frequent Contributor
  • **
  • Posts: 901
  • Country: us
Re: Microsoft Surface Table looking for hard drive image
« Reply #2 on: February 09, 2018, 04:23:20 am »
Thank you Chuck, but this is for the 1st Generation Surface Table,
No listing for Table on that page.

Logged
Tektronix TDS7104, DMM4050, HP 3561A, HP 35665, Tek 2465A, HP8903B, DSA602A, Tek 7854, 7834, HP3457A, Tek 575, 576, 577 Curve Tracers, Datron 4000, Datron 4000A, DOS4EVER uTracer, HP5335A, EIP534B 20GHz Frequency Counter, TrueTime Rubidium, Sencore LC102, Tek TG506, TG501, SG503, HP 8568B
 

Offline ChuckDarwin

  • Regular Contributor
  • *
  • Posts: 57
  • Country: gu
Re: Microsoft Surface Table looking for hard drive image
« Reply #3 on: February 10, 2018, 04:09:53 am »
My error, I had read "tablet" not "table".  Nice piece of unique kit you have acquired. 
Designed for Vista, but will also run 8.1.  It looks like you could install vanilla vista and load in the driver kit for the positioning cameras and the app suite on top--assuming success in locating them.

The PixelSense (ms name change) site https://www.microsoft.com/en-us/pixelsense/default.aspx has a broken links and drained of any really usefull info, but you could search elsewhere on the kit (file) names.   
Have a look here, too, if you haven't see it yet, https://joepweijers.nl/technical-notes/microsoft-surface/ for info and links.

Logged
 
The following users thanked this post: Johnny10
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee