Author Topic: Delete  (Read 1400 times)

0 Members and 1 Guest are viewing this topic.

Offline KG7AMV

  • Regular Contributor
  • *
  • Posts: 110
  • Country: us
    • My Personal Blog
Delete
« on: July 01, 2018, 09:20:10 pm »
Deleted
« Last Edit: November 13, 2018, 11:32:16 am by KG7AMV »
 

Offline Cyberdragon

  • Super Contributor
  • ***
  • Posts: 2422
  • Country: us
"doesn't look" may not be good enough, they could still be fried internally. Diode test them for shorts. The transistors look like the only thing high enough power to blow up that large resistor without blowing themselves up.

What is that component on the transistor and diode rack third from the bottom right with 5 leads?
*BZZZZZZAAAAAP*
Voltamort strikes again!
Explodingus - someone who frequently causes accidental explosions
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 2906
  • Country: ca
Re: Miller 375 X-TREME Plasma Cutter Service Manual / Schematic Needed.
« Reply #2 on: November 03, 2018, 03:04:04 pm »
Glad it worked,  what a complicated way to add multiple heat dissipators,  why they did not use an plain single one ?  tons of manufacturing processes and costs ?  and they snap onto the transistors  pfffff
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf