Author Topic: MULTIMETER UNI-T 58B  (Read 1235 times)

0 Members and 1 Guest are viewing this topic.

Offline lionelkjhTopic starter

  • Frequent Contributor
  • **
  • Posts: 316
  • Country: fr
MULTIMETER UNI-T 58B
« on: December 11, 2024, 09:50:09 am »
Hello; I am looking for someone who could take several photos of the central switch alone with the position of the contacts of the UNI-T UT58B multimeter (above/below).....Thank you in advance for your dedication ;)
 

Offline Overspeed

  • Frequent Contributor
  • **
  • Posts: 523
  • Country: fr
Re: MULTIMETER UNI-T 58B
« Reply #1 on: December 14, 2024, 04:16:52 pm »
Hello

Better to post in repair section / thread as that far to be a metrology instrument

I suppose you need a picture of the PCB for the angular position of the knob .

Regards
OS
« Last Edit: December 14, 2024, 04:45:29 pm by Overspeed »
 
The following users thanked this post: mendip_discovery

Offline lionelkjhTopic starter

  • Frequent Contributor
  • **
  • Posts: 316
  • Country: fr
Re: MULTIMETER UNI-T 58B
« Reply #2 on: December 20, 2024, 06:24:38 pm »
Good evening; I am closing this discussion.....
 

Offline mendip_discovery

  • Super Contributor
  • ***
  • Posts: 1024
  • Country: gb
Re: MULTIMETER UNI-T 58B
« Reply #3 on: December 20, 2024, 07:00:10 pm »
Panto, OH NO YOU'RE NOT!
Motorcyclist, Nerd, and I work in a Calibration Lab :-)
--
So everyone is clear, Calibration = Taking Measurement against a known source, Verification = Checking Calibration against Specification, Adjustment = Adjusting the unit to be within specifications.
 
The following users thanked this post: Overspeed

Offline Overspeed

  • Frequent Contributor
  • **
  • Posts: 523
  • Country: fr
Re: MULTIMETER UNI-T 58B
« Reply #4 on: December 21, 2024, 01:51:02 pm »
Good evening; I am closing this discussion.....

Hello

This is a  forum ( and a very useful  forum ) not a jungle , you ask a question , ok , I provide you an answer .... my assessment is still : metrology is not the right place for this question .

Regards from France
OS
« Last Edit: December 21, 2024, 02:34:58 pm by Overspeed »
 

Offline lionelkjhTopic starter

  • Frequent Contributor
  • **
  • Posts: 316
  • Country: fr
Re: MULTIMETER UNI-T 58B
« Reply #5 on: December 22, 2024, 09:53:13 am »
HELLO; unable to delete the previous message, I therefore moved the message to 'repairs': PLEASE BE UNDERSTANDING AND DO NOT UNLOAD YOUR BAD MOOD ON ME! ??? ??? ???
 
The following users thanked this post: BILLPOD

Offline Halcyon

  • Global Moderator
  • *****
  • Posts: 6120
  • Country: au
Re: MULTIMETER UNI-T 58B
« Reply #6 on: December 22, 2024, 10:03:34 am »
HELLO; unable to delete the previous message, I therefore moved the message to 'repairs': PLEASE BE UNDERSTANDING AND DO NOT UNLOAD YOUR BAD MOOD ON ME! ??? ??? ???

You can delete your own replies to a thread, but not entire threads, even if you started them. Moderators can delete entire threads or move them for you.
« Last Edit: December 22, 2024, 10:05:36 am by Halcyon »
 

Offline lionelkjhTopic starter

  • Frequent Contributor
  • **
  • Posts: 316
  • Country: fr
Re: MULTIMETER UNI-T 58B
« Reply #7 on: December 22, 2024, 11:55:22 am »
Hello; ok; thank you for answering so quickly and especially so kindly!  :=\
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf