EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: godfrey on March 06, 2018, 06:07:58 am
-
Hello everyone,
I accidently broke one of the pots in my PSC DV Promix 3 Portable Audio Mixer. I need a replacement immediately, but I have no idea where to go.
I believe it's a 20k -- 6 pin, right angle, yellow in color. 1/4 inch(ish) shaft (6mm)? Flat on one side, 0.662 inches in length (17mm). A2 03 is printed on the back. I've tried to be as specific with Google as I can, but I can't seem to locate one.
Any ideas?
Sincere regards,
Phil Godfrey
-
Have you tried contacting Professional Sound Corporation?
If they can't (or won't) help you I'd check Mouser or Digikey.
Let us know what happens.
-
Is an ALPS dual potentiometer like this one:
https://www.ebay.de/itm/RK12L1210C0R-10kOhm-dual-logarithmic-15A-potentiometer-30mm-Alps/302636867962 (https://www.ebay.de/itm/RK12L1210C0R-10kOhm-dual-logarithmic-15A-potentiometer-30mm-Alps/302636867962)
Fleabay is full of them, just make sure if it's a logarithmic or linear guy and check the value.
Cheers,
DC1MC
-
Thank you for the replies. I was in panic mode last night because I know there are some manufacturers that will not sell components. PSC was happy to send me a few along with a schematic. I should have the parts in a couple of days.
W00T!
(sigh of relief)
Thanks,
Phil