Electronics > Repair

Need longer tip plugs

<< < (3/7) > >>

Analog Kid:

--- Quote from: tooki on November 09, 2024, 12:20:04 pm ---
--- Quote from: Analog Kid on November 09, 2024, 12:00:55 am ---Wasn't quite sure where to post this; I hate to clutter up the Test Equipment forum with such a picayune problem.

Tip plugs: probably the most mundane electronic parts imaginable. I need some to make new test leads for a multimeter. I have some plugs, but it turns out they're not long enough to reach into the meter's sockets.

--- End quote ---
Do you actually need 19mm pin length, or is that only because the socket itself is recessed (i.e. the plug body is preventing the pin from being inserted fully)?

--- End quote ---

Both, really; the contacts are recessed far enough that the "regular" length ones (~12mm) just don't reach.


--- Quote ---If it’s just the fat plug body that’s the problem, how about making your own plugs, e.g. by using 2mm electrical contacts (like this: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FY6-E542-000-000%7FA%7Fpdf%7FEnglish%7FENG_DS_Y6-E542-000-000_A.pdf%7F61-0205-011-000 ) and then using heat shrink to insulate part of it to make a grip? I’ve done that for various pins to make test leads (for example, banana plug to single d-sub pins and sockets).

--- End quote ---

Those would be perfect. However, not sure how to find a source for those: do you have any links to purchasable items?

And I'd do better than just heat shrink, make a proper plastic sleeve for them. Esthetics, dontcha know.

MarkF:
They look an awful lot like the old Radio Shack analog multimeter test probes.

On eBay, I found these Radio Shack 278-712B Right Angle Pin Tip Plug Test Probe Leads
You would have to ask the seller to measure the plug diameter and length.

Analog Kid:
Those would probably fit.
But gedouttahere: I ain't paying $20 for something I can cobble together for pennies.

MarkF:
Found:  4mm Banana Jack to 2mm Pin Tip Plug



Analog Kid:
Yeah, for $11.60 for 4.
Thanks but no thanks.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod