EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: madao on November 06, 2019, 05:56:39 pm

Title: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software [SOLVED]
Post by: madao on November 06, 2019, 05:56:39 pm

Hello people.

I have repaired  TDS640,of course capacitor plague.
But NVSRAM  is corrupt  und i am needed dump  of functional TDS640.
Do exist  TDS600 field adjust software?


Thanks.
Matt

Title: Re: Needed TDS600 field adjust software
Post by: madao on November 09, 2019, 08:04:07 am

I have getting NVSRAM Dump of TDS640.


Greetings
matt

Title: Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software
Post by: rf+tech on November 12, 2019, 02:52:57 am

Hello madaeo,

Attached below is TDS600A.ADJ Field Adjustment Software. To add support for TDS640 (plain, no letter) to TDS600A.ADJ after installation:

  Open directory TDS600A.ADJ

  Edit DUTLIST. There are three entries, TDS620A, TDS640A and TDS644A
  Add TDS640 below the last entry, save and close file DUTLIST.

  It is necessary to make a copy of file Tds640a.con, and name the copy Tds640.con
  Also, make a copy of file Tds640a.idx, and name the copy Tds640.idx

It is not necessary to edit either file copy. With these steps, I have successfully calibrated a TDS640 on the first attempt.

RF+ Tech

Title: Re: Needed NVSRAM Dump of TDS640 or/and TDS600 field adjust software
Post by: madao on November 12, 2019, 04:38:48 am

Great !   Thanks.
It is really simpel !

Regards
Matt