EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: cowboy on October 21, 2016, 06:13:58 am

Title: Part needed for Fluke 87-III repair
Post by: cowboy on October 21, 2016, 06:13:58 am
I am repairing my Fluke 87-III and I have encountered a part I need that is no longer available  :-[

It is the grey seal around the entire perimeter of the meter's case, if anyone has one, even used is fine.

It fits on to the bottom case half, so an 87-III bottom case half would work as well, if seal is still present.

I can paypal you.