Noyes M600 OTDR

[Bics]

G'day, all!

I recently picked up a Noyes M600 OTDR from the Ebays; someone in Pennsylvania clearing out a storage locker. This device was built in 2002 and appears to have been last used in 2007. After some poking and prodding, I was able to get the device to boot but as soon as the OTDR application launches I get a "Floating Point Error: Divide by Zero. Abnormal Termination" message, and the machine immediately shuts off. I was able to download the firmware from the AFL (Noyes) website, but the upgrade procedure requires the use of a 3.5" floppy, which isn't something I have laying around the house. While I work on tracking down a floppy disk and a working drive, I thought I'd ask to see if there are any AFL/Noyes fibre guys that may have seen this error before.

Many thanks!