Author Topic: HP 54110D (Read 2595 times)

Daxxin · « **on:** March 27, 2016, 07:21:38 pm »

This cpu is a motorola 68000 ? while booting i get software error at address 0000AH0 ..its a eprom address or cpu address?

uncle_bob · « **Reply #1 on:** March 28, 2016, 01:11:40 am »

Hi

Errr ..... AH0 as the last digits? That does not look like hex.

Ax0 is most likely on the CPU. If not, it's low ram off the CPU.

Bob

Daxxin · « **Reply #2 on:** March 28, 2016, 04:03:00 am »

Hi , i was thinking something similar too , cpu is mc68000l
but looking at allocation table looks like rom area.

picburner · « **Reply #3 on:** March 28, 2016, 08:20:35 am »

If the problem is a corrupt EPROM here you can find a copy of the firmware:

http://www.ko4bb.com/getsimple/index.php?id=download&file=HP_Agilent/HP_54110D_Digitizing_Oscilloscope_EPROM_54100-66530_Re.zip

Not knowing if the firmware release is the same, you should burn a full set of EPROMs.

EEVblog Electronics Community Forum