PACE ADS200

[SMARTMULTI]

Hello, accidentally smokes my new 110V PACE ADS200 with 230V ac 

With help from the forum have found a schematic for the unit to assist in the repair, however no mention of the secondary transformer voltage.

Does anyone know what it should be?

Thanks in advance.

[Shock]

Eventually got around to it.

I measured 240V Primary 24V Secondary RMS
No significant drop between no load (PCB power cable disconnected) and idle (with no iron connected)
Between 23-24V during a quick test of heating pulses (it bounces around).

[SMARTMULTI]

Thanks Shock, this one here seems to have taken a beating in that case, will have a 230/24 made up to replace the 110/24. Much appreciated.

[SiliconWizard]

Does the unit have a primary fuse? 

[Shock]

Does the unit have a primary fuse? 

It does and they include a spare fuse if required.