Author Topic: Fluke 19 Repair  (Read 502 times)

0 Members and 1 Guest are viewing this topic.

Offline benk

  • Newbie
  • Posts: 1
  • Country: au
Fluke 19 Repair
« on: May 05, 2019, 12:24:53 pm »
Hey all,

Hoping someone can point me in the right direction, Turned my trusty Fluke 19 on today whilst working on a project, after a few bum steers it turns out the DC Voltage input on the meter stopped reading, along with the resistance setting.

Symptoms
  • No DC reading, floating voltage when not connected, OL reading when connected to voltage source
  • In Ohms mode, OL when not connected, Flickering OL when leads shorted together

I pulled it apart and check the usual R1 fusable resistor but that was reading 1k. AC voltage reading works ok. I cant seem to find a schematic or service manual on the net  :(

Does anyone have any suggestions on where to check next?

Cheers
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf