Author Topic: PCB Repair guide (Read 7301 times)

Fraser · « **on:** October 05, 2013, 09:27:07 pm »

Just found an interesting PCB repair guide that may be of interest to others.

http://www.intertronics.co.uk/resource/guide1.pdf

fpliuzzi · « **Reply #1 on:** October 06, 2013, 01:04:40 am »

That's a very comprehensive PCB repair guide with lots of clever solutions for dealing with damaged circuit boards. Thanks for pointing out this pdf.

Frank

robrenz · « **Reply #2 on:** October 06, 2013, 01:44:37 am »

Very nice!

Thanks

Kremmen · « **Reply #3 on:** October 06, 2013, 05:45:13 am »

Thanks for the link. I too downloaded this for later reference.

John steave · « **Reply #4 on:** October 06, 2013, 05:39:24 pm »

It's good for all. Thanks!!!!

ijchan223 · « **Reply #5 on:** October 07, 2013, 01:12:23 am »

very helpful, thanks for sharing

chrisdevilx3 · « **Reply #6 on:** October 07, 2013, 01:38:55 am »

nice! Thanks for sharing

filip_cro · « **Reply #7 on:** October 07, 2013, 09:02:05 am »

Thanks. This would help me a lot when we were making PCBs in school. 50% of boards had some kind on fail on them. (usually broken traces)

locoo · « **Reply #8 on:** October 07, 2013, 11:31:14 am »

tnx very nice

Fsck · « **Reply #9 on:** October 07, 2013, 11:34:40 am »

Neat, thanks

robert555 · « **Reply #10 on:** October 07, 2013, 11:37:42 am »

Very good pdf! Thanks for sharing!

flattermann1822 · « **Reply #11 on:** October 07, 2013, 04:52:06 pm »

very good, thanks

pilogger · « **Reply #12 on:** October 07, 2013, 05:29:14 pm »

Great!! Thanks so much..

GingGangGooly · « **Reply #13 on:** October 07, 2013, 05:44:10 pm »

Thanks for the heads up.

They also have a document on '25 Top Dispensing Tips' for fluids etc.
http://www.intertronics.co.uk/25toptips/adh_25_top_dispensing_tips.pdf

Electr0nicus · « **Reply #14 on:** October 07, 2013, 06:26:45 pm »

Really awesome! Thanks!

niflheimer · « **Reply #15 on:** October 08, 2013, 05:09:51 pm »

Quite ... comprehensive , thanks for the link.

mcinque · « **Reply #16 on:** October 09, 2013, 11:44:41 am »

thank for sharing!

Gazucha · « **Reply #17 on:** October 09, 2013, 04:07:32 pm »

Thanks from Brazil too.

ElectricMan · « **Reply #18 on:** October 09, 2013, 08:42:12 pm »

Awesomeness! It's almost millitary-standards material.

Gravity1337 · « **Reply #19 on:** October 12, 2013, 05:57:18 am »

Nice! This would have saved my backside a while back.. thanks for sharing!

npnlamp · « **Reply #20 on:** October 12, 2013, 04:52:04 pm »

Thanks from Lithuania

Kjelt · « **Reply #21 on:** October 12, 2013, 10:09:34 pm »

Thanks for sharing.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: PCB Repair guide (Read 7301 times)

Gazucha

Share me