EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: SergeDr on April 14, 2021, 11:22:15 am

Title: Philips PM2528 calibration
Post by: SergeDr on April 14, 2021, 11:22:15 am
Hello,
I have some issues with a philips PM2528 dmm I picked up a while ago.
So far it appears to be functional but it requires calibration: on the dc ranges it is about 200 microvolt off.

Does someone have experience with this DMM?
Lots of trimmers, VERY tempting ...

Thanks!