EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: qno on January 31, 2017, 03:23:33 pm

Title: Philips/Fluke PM9355 current probe/amplifier (Service) manual anyone?
Post by: qno on January 31, 2017, 03:23:33 pm

Hi all,

I aquired a Philips PM 9355 Current probe/amplifier combination.
Seems to weork but the measurements are a bit of.

It needs a 50 ohm scope input but someone has had a go at it and put a 50 ohm resistor in the case itself.

Does anyone has a manual or service manual i can consult for calibration?
Or a link i can go to to verify / repair the probe?
Thanks.

qno

Title: Re: Philips/Fluke PM9355 current probe/amplifier (Service) manual anyone?
Post by: tautech on February 01, 2017, 07:07:17 pm

Tell us if this one is OK:
http://freeservicemanuals.info/nl/servicemanuals/viewmanual/Philips/PM9355/ (http://freeservicemanuals.info/nl/servicemanuals/viewmanual/Philips/PM9355/)

Title: Re: Philips/Fluke PM9355 current probe/amplifier (Service) manual anyone?
Post by: qno on February 03, 2017, 03:26:16 pm

Great, many thanks.