Please help identify smd parts Rohde Schwarz SMIQ02B IQ modulator

[phlegeton]

Hello,

I try to repair a IQ modulator from a R&S SMIQ02. At a first look at the components, I can't identify some smd parts. Hope their is someone we came across these parts, and can help me out. I can read the markings on the parts: The first part seems to have the marking "RP11G N580-4" the second part is under a metal part, but reads "N4".

If a search on this "N4" part I only can find the 'NBB-400' and this is a MMIC amplifier DC to 8Ghz. Which I'm not sure if this is right. I can't find anything on the  "RP11G N580-4" part.

[BreakingOhmsLaw]

That's an FP1189 Power FET.



EDIT:
https://www.qorvo.com/products/p/FP1189-G#overview

[Storm]

N4 refers to Sirenza/Stanford Microdevices NGA-486.

[phlegeton]

Thank you all! With this I can investigate further. I searched high and low. What is the trick to identify these smd parts ?

[fzabkar]

http://www.smdmark.com/en-US/search/code?id=fp11g
https://www.google.com/search?q=filetype:pdf+fp11g

[phlegeton]

ah I see where I got it wrong: I read the first character as "R" not as a "F". Again thanks. Now I now the part numbers it's so much easier to find the right datasheets.

[zmetzing]

Make sure you trace the signal path through those RF switches (white squares marked "4227T") before replacing the active devices. I replaced the amplifiers only to find out that the real problem was a bad switch.

https://www.eevblog.com/forum/repair/rohde-schwarz-smiq03b-with-error-110-output-unleveled-iqmod-alc-failure/msg3189932/#msg3189932