« previous next »
Pages: [1]   Go Down

Author Topic: PM2525  (Read 717 times)

0 Members and 1 Guest are viewing this topic.

Offline lionelkjhTopic starter

  • Frequent Contributor
  • **
  • Posts: 298
  • Country: fr
PM2525
« on: April 07, 2022, 01:43:03 pm »
Good morning all! I am looking for the input wiring diagram (banana plugs) on a PHILIPS PM2525 multimeter (gray); on mine; the card connecting the inputs is missing, and the banana plugs are broken.....I am attaching a photo of the missing card on my multimeter that I recovered on this site on an old post.... Thank you for your help ! :-+
Logged
 

Offline wn1fju

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
Re: PM2525
« Reply #1 on: April 08, 2022, 12:39:45 pm »
I pulled the card out of mine and took photos of front and back.  You should be able to reverse engineer the wiring diagram from that.  The capacitors measure 100 nF, but I have no idea about the inductor.

By the way, I have found the PM2525 to be just about the most ridiculous DMM I've come across.  From the idiotic motorized switch, to the nearly impossible calibration procedure, to the mediocre specs, I am not at all happy with it.  Just my opinion....
Logged
 

Offline lionelkjhTopic starter

  • Frequent Contributor
  • **
  • Posts: 298
  • Country: fr
Re: PM2525
« Reply #2 on: April 08, 2022, 01:24:37 pm »
Thanks a lot!!! :-+ :-+ :-+
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee