Electronics > Repair

Power switche Oscilloscope Rigol 1052

(1/2) > >>

GGMM:
Hello,

I anticipate a push button troubleshooting of this type on a Rigol oscilloscope.
Where do you think i can buy this piece?
If you have a reference.

see pictures capted from youtube
thank you

GGMM:
hello,

Something that starts to look like
Small adjustment to make
It's 50v 0.5A, some others models. to be see

https://www.chinadaier.com/ps-12e01l-maintain-spring-return-switch/

cdt

tunk:
If it's on the primary side, it needs to be at least 230V.

GGMM:
Hello,

I know. That’s an example. You can probably find for 230V.
I have some old TV shackles. I’m sure I have a similar switch. It may have 6 pins?
Anyway, I have to go to see the case.
We can imagine a poultice. LOL

cdt

GGMM:
hello,

i have found
see here

http://szbej.com/en/index.php?r=article/Content/index&content_id=931

it's the same

I think it is possible to repair it with an equivalent
Get the part that holds the button, it should be fine

Navigation

[0] Message Index

[#] Next page