Electronics > Repair

Proper tools for replacing thermal fuses.

<< < (3/3)

SeanB:
Bootlace ferrules work well, thin wall, and crimp onto the wire and fuse well. Just slide thermal fuse wire in one end, and wire the other, and crimp. might have to use a slightly bigger one, but they are easier to find over bare small crimp connectors. But I just use long nose pliers and solder them in, especially with those like 130C and 200C versions. 70C you really want to crimp, or leave the leads long, and sleeve them after crimping.

soldar:
A good twisted splice should also be reliable.

Hamelec:
https://hl-elektroshop.eshop.t-online.de/Quetschverbinder-fuer-Temperatursicherung-1001506

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod