Electronics > Repair
Quick Repair: Standford Research PS350 5KV 5mA(Fixed but working on calibration)
<< < (11/11)
nexus:

--- Quote from: Dexter2 on August 01, 2017, 01:53:41 pm ---
If required i can make an executable you would then only need to download a free runtime engine to get it working.


--- End quote ---

Hi Dexter; appreciate all the work you and others have shared on this very useful thread. If you have an executable for the PS350 program you wrote, that would be great!
nexus:
Hi all,

I downloaded labview and compiled the PS350 calib that Dex wrote from a VI into an EXE. You should be able to run it with the LabView runtime only.

I just completed a user calibration on my PS350. I used a B2902A SMU to calibrate current (around 100V) and used a DMM6500 with a caddock HVD5-A50M-050-05 divider to do the high voltage adjustments.

To compensate for the divider error I measured the ratio before starting (mine was 49.978 M over 50.032 K).

Also wrote a text file to record values as I manually tuned them. This was helpful to guide the adjustment procedure.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod