Electronics > Repair

Quick Repair: Standford Research PS350 5KV 5mA(Fixed but working on calibration)

<< < (11/11)

nexus:

--- Quote from: Dexter2 on August 01, 2017, 01:53:41 pm ---
If required i can make an executable you would then only need to download a free runtime engine to get it working.


--- End quote ---

Hi Dexter; appreciate all the work you and others have shared on this very useful thread. If you have an executable for the PS350 program you wrote, that would be great!

nexus:
Hi all,

I downloaded labview and compiled the PS350 calib that Dex wrote from a VI into an EXE. You should be able to run it with the LabView runtime only.

I just completed a user calibration on my PS350. I used a B2902A SMU to calibrate current (around 100V) and used a DMM6500 with a caddock HVD5-A50M-050-05 divider to do the high voltage adjustments.

To compensate for the divider error I measured the ratio before starting (mine was 49.978 M over 50.032 K).

Also wrote a text file to record values as I manually tuned them. This was helpful to guide the adjustment procedure.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod