Electronics > Repair
Repair Siglent SDS1102DL
tautech:
--- Quote from: Roman Nartov on September 30, 2015, 09:42:08 am ---Dear friends, thank you for responding! I understand you correctly I need to release the cable from the connector and re-insert it into place? Sorry to ask again but I work with a translator. Thank you for your understanding.
--- End quote ---
Yes that is correct. One of the gray ribbon cables is for the front panel keypad and the other is for the LCD.
Note there is another LCD connection hidden behind the LCD. You must check this other hidden LCD connection too.
Roman Nartov:
Thank you for the prompt information, please tell me where you are hidden behind lcd panel connection? These connections also go through a mechanical connector?
In all the pictures you can see that the ribbon cable goes directly to the screen without mechanical coupling, it is necessary to remove the metal housing from the lcd screen?
Please tell me if it doesn't work then can I change the screen like in this link : https://www.eevblog.com/forum/repair/sds1102cml-lcd-26-pin/msg720299/#msg720299
And do I understand correctly that the model of this lcd screen AT070TN07 ?
Thank you for taking the time and understanding of my problem
tautech:
--- Quote from: Roman Nartov on October 02, 2015, 04:11:33 pm ---Thank you for the prompt information, please tell me where you are hidden behind lcd panel connection? These connections also go through a mechanical connector?
In all the pictures you can see that the ribbon cable goes directly to the screen without mechanical coupling, it is necessary to remove the metal housing from the lcd screen?
--- End quote ---
See movie @ 0.44.
https://docs.google.com/file/d/0B_dQmKARz4hfSlhtU01yY1dlTXM/edit?pli=1
Yes, the hidden interface connector is behind the metal housing.
To access this connector you must dismantle the scope.
sonielkraf:
heloo tautech, ihave siglent sds1102dl, i incorect firmware update with another series, and now my scope is not normaly, do you have firmware for sds1102dl ? i attached image for firmware version befor updated, thanks to you...
tautech:
--- Quote from: sonielkraf on October 13, 2024, 07:45:18 pm ---heloo tautech, ihave siglent sds1102dl, i incorect firmware update with another series, and now my scope is not normaly, do you have firmware for sds1102dl ? i attached image for firmware version befor updated, thanks to you...
--- End quote ---
Welcome to the forum.
Sorry but no resources for early DL models, only for DL+.
You might try Siglent HQ ......
sales@siglent.com
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version