EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: Acer444 on September 07, 2023, 08:28:22 pm
-
My headphones stopped working because of broken wires, I took apart the USB-c connector to resoldier wires but accidentally scratched off the markings on PCB while removing compound and now I have no idea how to soldier 5 wires back in the correct order. Any ideas? The original headphones are for Huawei mate 20 pro smartphone.
-
(https://i.imgur.com/dzFtV9H.png)
You gotta take out the rest of white gue and ring it to the actual USB-C connector, see what is what.
-
Nah, these headphones are way more elaborated,they have they own DAC, I had them.
-
If you take off the gue, you will see where the ground is, 3 of them, and where the mic is, left right is going to be hit or miss.
-
There is another approach. Find 3 grounds. Then find find left, then find right, by soldering and trying to play music. The remaining one would be mic.
-
If DavidAlfa is correct that these headphones have their own DAC then there are no analogue signals on the connector and all the above posts by u666sa can be ignored.
-
Yes they do, the DAC is in that small board!
-
Plug it in, play test tone (different frequencies on left and right channels), probe with scope to find the left and right channels and ground.