| Electronics > Repair |
| Repairing a Rocktron GAP v1 - Replacement fuse |
| (1/1) |
| alderfc7:
Hi, I have been working on an old Guitar preamp Rocktron GAP v1 (model of 1990 I think). These had issues with the Voltage regulators and caps blowing due to heat since they are next to the transformer. I have replaced the regulators and caps and looks like the fuse is also blown. I need some help identifying the right resistible fuse to replace it with (It's the first time I encounter such fuse). As I understand this is a 500Ohm 1/2Watt fuse (the rating of the preamp is 22Watt which aligns with a 500Ohm resistor). Can I have some help confirming it and get maybe some suggestions on replacement options? :) Thank you in advance! :) |
| David_AVD:
It's a 500mA fuse, not a resistor. The rating (1/2 Amp) is written on the PCB. |
| alderfc7:
thanks for the help!yeap, i can confirm it's a 500mA fuse. first time i come across. |
| Navigation |
| Message Index |