| Electronics > Repair |
| Repairing laptop; need advice on tactile switch manufacturer to go with. |
| (1/1) |
| ballsystemlord:
Hello, I have an older laptop who's only problem is that the mouse button switch failed. I've not yet opened the laptop up, but it feels like it's a basic 4p dip switch which you see used everywhere. Because it's a mouse switch, it's going to take a lot of abuse. So, I decided to look for something with more endurance. I'm now browsing mouser and I see for the highest endurance switches I can choose between the following manufacturers: C&K Switches E-Switch Omron Alps Alpine Apem IDK which of these would be considered the best. I'm also uncertain if there's a particular switch design which, though different, I might bodge in to get a more permanent solution. Anyone got advice? Thanks! |
| ballsystemlord:
I opened it up. The buttons look like half height SMD ones. Other than that, it's exactly what I expected. |
| amyk:
I've had success with opening those switches up and polishing the contacts with cleaner. If you really want to replace it, Alps and Omron are safe choices. |
| Navigation |
| Message Index |