EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: gerovite on October 20, 2015, 01:12:51 pm
-
I appeal to owners Tektronix 2213
What should be the waveform in point 9 SWEEP GENERATOR & LOGIC
thanks in advance
-
There is nothing wrong with the waveform except that maybe your oscilloscope's rise time/bandwitdh is not fast enough. Try using X10 setting on probe. The 74Sxx series logic is pretty fast.
-
Welcom on the forum.
It would be better to describe the problem you have with your scope.
What's wrong ?
-
Thanks for your kind reply :)
I can not take a picture on the oscilloscope because currently there is no chip 74f74.
Here is the problem:
When capture sin in CRT displayed:
-
That's not a very clear explanation...Is the sine wave sincronised ?
Do you display only one channel or both ?
If sine wave is well syncronised and only one channel displayed, it seems to be a blanking problem during retrace.
-
Do you display only one channel or both ?
sorry, it's only one ch
-
Trigger works well or not ?
-
Trigger work
-
In repair, there is a basic rule: always to start from the beginning and never to rely on the diagnostic made by others.
What You suspect does not interest me, what I want is a detailed description of the problem as it appeared originally.
I do not need you to copy the service manual, I have it too.
Simply answer to my questions !
With your way of responding, whe are going nowhere. :palm: